Bopla Gehäuse Systeme GmbH | Borsigstr. 17-25, 32257 Bünde
Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de
Tel.: +49 (0)5223 / 969 - 0 | E-Mail: info@bopla.de | Internet: www.bopla.de
Interzoll | Subrack with profile side wall 3 U for backplanes (.Pi)
BGT 22360.Pi
Order no.: 53223625
BGT 22360.Pi
Order no.: 53223625
Add to the shopping basket
Show the shopping basketDownload print view
* = Available on request.
Product drawing
Enclosure concept
Characteristics
Dimensions
132.5 x 375.92 x 218.24 mm
U
3
HP
63
Cards depth
160
Protection class
IP
20
NEMA
1
Enclosure Material
Profile Al Mg: Si 0.5; for details see Technical Information
Scope of delivery
1) 2 side panels with integrated flange (BSW 22300)
2) 2 front profiles (PF 000..)
3) 2 bus profiles (PBK 000..)
4) 8 screws M4 x 12 (BFS 0100)
5) 2 tapped strips for front panel fixing (GS 000.. I)
6) 2 tapped strips for backplane fixing (GS 000.. II)
7) 2 M2.5x5 (GSE-5) slotted set screws
8) 2 M2.5x8 (GSE-8) slotted set screws
Note
Backplane mounting without insulating strips. Subrack with handle on request.
The dimensions are approximate values. The exact values can be found in the respective product drawing.
Important!
To compensate for pressure when temperatures change and cause moisture in the enclosure, we we recommend that you use a
pressure compensation
element.
In order to ensure that you can determine the correct quantity of elements for your application, we are providing you here with a DAE calculator.
Technical documentation / Downloads
3D product data in STEP format:
Login to download
Product drawing in PDF format:
53223625 BGT-22360-Pi.pdf
(56.1 KB)
Product drawing in DXF format:
53223625 BGT-22360-Pi.dxf
(966.6 KB)
- 19 Inch Standard Overview EN.pdf(4.6 MB)
- interzoll en.pdf(4.1 MB)
Matching accessories
Clamp profile sets, natural-coloured anodised aluminium, for screwing on of the cover plates
Clamp profile sets-l, natural-coloured anodised aluminium, for screwing on 2 cover plates behind each other
End profile on rear, natural-coloured anodised aluminium, for subrack side panels
Flanges 3 / 6 U for mounting with subrack side panels with handle drill holes
Handles for subracks, natural-coloured anodised aluminium
Partition, 3 U, screwable, with slots for GS…ll, natural-coloured anodised aluminium, for separating defined sections
Perforated cover plates, galvanised lacquered sheet steel, visible surface light grey lacquered, hole dia. 2,5 mm
