BoLink

The intelligent and versatile enclosure system for modern IoT sensor technology

1 basic size
3 heights
2 colours
3 variants (without wall brackets, with wall brackets, with wall brackets and lid fixing on top)
Design seal optional
PC material is suitable for outdoor use due to f1-listing according to UL 746C

Enclosure concept

Highlights

The different variants: With and without wall brackets, and screwing from the front and behind.

Pressure compensation by mounting the DAE-D11 pressure compensation membrane. For this purpose, drill (or punch) a hole in the moulded contour from the inside and glue the membrane in position.

Ingress protection IP 65 by means of design seal; available in various colours. This increases the electronics mounting height by approx. 1.7mm.

Other colours can be used depending on the project, for example translucent.

A 1.6 mm thick PCB can be clamped directly between the enclosure parts and optionally hot-caulked via two pins.

Without wall brackets

Recessed membrane area (0.6 mm) in the lid and base; interfaces can be fitted on four sides.

Characteristics

Black, similar to RAL 9005;
White, similar to RAL 9003;
Special colours on request

IP40; with seal: IP65 / DIN EN 60529

NEMA 1; with seal NEMA 3 / NEMA 250-2018

Enclosure: PC UL 94 V0
PC V-0 material is flame-resistant, self-extinguishing and suitable for outdoor use;PC UL 94 V-0 achieves the highest flammability rating of UL 94 5V even with slightly reduced outdoor suitability (f2 listing acc. to UL 746).

Seal: TPE

For details see technical information