Cable glands / General Accessories

Information on EX: Cable glands and blind plugs for use in hazardous areas are tested independently of the unit enclosure and are certified as electrical material with EC type-examination certificates in accordance with EU directive 94/9/EC (ATEX). They are suitable for introducing cables and leads into hazardous areas in equipment group II, categories 2 and 3, with gas explosion protection G, and/or in some cases with dust explosion protection D, in ignition protection types EEx e “increased safety” (EN 60079-7) and EEx i “intrinsic safety” (EN 60079-11). For ignition protection type EEx i, we can also supply the polyamide cable glands for marking with a blue cap nut.

The different battery compartments allow almost every enclosure type to be used as a hand-held enclosure.

Universal mast mounting in 5 standard sizes with different mounting spacings for fitting enclosures to the mast.

Because of the various settings (fixed detent position every 10°), the universal wall fitting can be used on a wall or as a foot. The length of the profiles can be adapted to every enclosure.

The universal DIN rail holders consist of a base and a bolt which can be snapped into the base in different positions. Fitting is approximately in the middle of the enclosure so that the protruding bolt can be released by means of a screwdriver.

The swivelling handle allows the flexible-width handle to be used both as a carrying handle and a tip-up bow.

By using the universal screw-on lanyard loop, hand-held enclosures can easily be carried round the neck.

The universal clip and tip-up clip can be retrofitted to all enclosures. It can be used as a wall hanging unit or belt clip or, if swivelled by 90°, as a tip-up bow.

Every hand-held enclosure can be fitted with a universal holding clip.

DAE: pressure compensation elements in light grey or black Protection class: - IP 66 / DIN EN 60529 - IP 68, 0,2 bar (60 min) / DIN EN 60529 - IP 69 / DIN EN 60529 THIS PRODUCT IS ONLY SUITABLE FOR USE IN INDUSTRIAL APPLICATIONS. It is not designed for the manufacture, processing or packing of foodstuffs, medicines or cosmetic and medical products.

POZ / MPOZ / POZB / MPOZB: - Pg/Metric - IP 65 / DIN EN 60529 - Polyamide, light grey, similar to RAL 7035 - Integrated strain relief - Temperature range: -30°C to +100°C - Integrated anti-kink protection (POZB/MPOZB)

MBL-EX..MS: - Blind plug, metric - IP 66 / 68, 5 bar (30 min)/ DIN EN 60529 - Brass, nickel-plated - Temperature range: -20°C to +80°C (MS) - Test standard: EN 60079-0/EN 60079-7/EN 61241-0/EN 61241-1 - EC test certificate: DMT 99 ATEX E016 MBL-EX..PA: - Blind plug - Metric - IP 66 - Polyamide, black, similar to RAL 9005 - Temperature range: -55°C to +95°C - Test standard: EN 60079-0/EN 60079-7/EN 61241-0/EN 61241-1 - EC test certificate: PTB 98 ATEX 3130 Additional blind plugs, twisting nipples, counter nuts, sealing rings, rubber seals etc.

DZP / TZP / KK / GD: - Half cable glands - Pg - IP 65 / DIN EN 60529 - Polyamide, light grey, similar to RAL 7035 (DZP/TZP) - Hostaform (KK)

MZI / PST: - Pg - IP 65 / DIN EN 60529 - Polyamide, light grey, similar to RAL 7035 - Integrated strain relief - Temperature range: -20°C to +100°C - MZI for internal mounting with a flat external assembly of 3 mm - With the PST, pre-configured cables can be completely mounted in the enclosure

MSS / MSD / MSKBF: - Pg - IP 65 / DIN EN 60529 (MSD/MSK) - IP 54 / DIN EN 60529 (MSS) - Brass, nickel-plated - Integrated strain relief (MSK) - Temperature ranges: - 20°C to +100°C (MSK), - 30°C to +110°C (MSS/MSD)

MEMV: - Metric - IP 66 / 68, 5 bar (30 min.) / DIN EN 60529 - Brass, nickel-plated - Integrated strain relief - Anti-twist protection - Temperature range: -20°C to +100°C - For leads with shielding - Fast, easy EMC connection of the screen mesh via the contact spring and the intermediate connection with the enclosure potential. - The protective shield is permanently formclosed over a large area of the enclosure

M-EX..MS/: - Metric - IP 66 / 68, 5 bar (30 min.) / DIN EN 60529 - Brass, nickel-plated - Integrated strain relief - Temperature range : -20°C to +80°C (MS) - Test standard: EN 60079-0/EN 60079-7/EN 61241-0/EN 61241-1 - EC test certificates: DMT 99 ATEX E016

M-EX..PA: - Metric - IP 66 / DIN EN 60529 - Polyamide, black, similar to RAL 9005 - Integrated strain relief - Temperature range : -30°C to +70°C - Test standard: EN 60079-0/EN 60079-7/EN 61241-0/EN 61241-1 - EC test certificates: PTB 99 ATEX 3101 X (M12,M16), PTB 99 ATEX 3128 X (M 20 and higher)

MSBF: - Metric - IP 66 / 68, 5 bar (30 min.) / DIN EN 60529 - Brass, nickel-plated - Integrated strain relief - Anti-twist protection - Temperature range: -20°C to +100°C

Universal enclosure feet ensure stability on all surfaces.