CombiCard 5000-7000

This modular enclosure system offers adaptability and protection class IP 66

3 widths
The depth can be varied by combining the components
Easy mounting of the system components
Hinge and access position freely selectable in the whole system
Various fronts
Optional rear element with separate terminal compartment (also on both sides)
Definable access protection
Installation of 19" components possible
Comprehensive range of accessories

Enclosure concept

Highlights

CombiCard is a modular system which allows the assembly of individual enclosure configurations.

All front, basic and rear elements can be combined in one basic size. The combination of “front with rear lid” can be created even without a basic element.

The integrated hinged quick-release catches allow easy fitting and left-hand or right-hand opening between each system component.

19“ subracks according to DIN EN 60297-3-101 can be fitted in suitable enclosure configurations.

With a suitable enclosure size, the base elements with air vents can be positioned according to the convection requirements.

Fitting of the enclosure does not require tools. Dismantling is possible with a slotted-head screwdriver.

Each hinged catch can be protected against unauthorised access by lock bolts or a lead seal. The fronts can be closed by means of a cylinder catch.

Circuit boards are fixed either by screw bosses in the rear lid or in guide grooves in the basic element.

Wall mounting is easy with the use of optional wall brackets.

The handle – available as an accessory – can be used to tip up the enclosure.

Characteristics

Lateral trims, front and base elements light grey, similar to RAL 7035; front lid FD…G, crystal-clear, rear elements agate grey, similar to RAL 7038; special colours on request.

IP66 / DIN EN 60529; with air vents IP30 / DIN EN 60529

Up to NEMA 3 / NEMA 250-2018, depending on the model

ABS; PC (only FD…G), seal made of CR; for details see Technical Information