RegloCard-Plus / Combifront / InterCard

Enclosure for a range of uses with separately accessible terminal compartment

  • IP degree of protection: Maximum degree of protection acc. to IEC/EN 60529 which can be achieved with this product series. For some product series, for example, a seal may be required and is available as an accessory.
  • Flammability rating UL94 V-0: The product series, or some variants, are manufactured of a flame-retardant plastic with a flammability rating of UL 94 V-0.
  • UV protection: The product series or some variants are manufactured from plastics whose certification acc. to UL 746 C means that they are suitable for outdoor use.
  • Locking: The enclosures in this series can be locked. For some product series, a lock (available as an accessory) is required.
  • Wall mounting: The enclosures in this product series can be mounted on a wall without the need for additional processing. Wall brackets (available as accessories) are required for some product series.
  • Hinged catch: The product series is fitted with an integrated hinge, so the lid is captive. For some product series, a hinge (available as an accessory) is required.
RegloCard-Plus / Combifront / InterCard
  • 8 sizes, each in 6 versions
  • 3 different fronts
  • Metric or Pg pre-punchings
  • Terminal compartment can be sealed off
  • PC UL 94 V0 material is suitable for outdoor use (f1 listing acc. to to UL 746C and corresponds to requirements set R 22 acc. to DIN EN 45545-2 of hazard level HL3
  • F-version front element available separately for control panel mounting
  • IC 5000 version with optimal insertion grooves for circuit boards

Application examples

Characteristics

Colour

Light grey, similar to RAL 7035;

special colours on request

Protection Class

Up to IP 65/DIN EN 60529, depending on the model

Enclosure Material

ABS, PC; seal made of EPDM; UL 94 V0 types on request; for details see Technical Information

Downloads

Technical Information

Highlights

RCP 1000: Crystal-clear lid, hinged, with snap lock; IP 65
RCP 100: With clip-on covering frame; IP 40
RCP F: With screw-on front lid for membrane keypads. Available with metric or Pg pre-punchings in the terminal compartment; max. IP 65
All models are available with metric or Pg pre-punchings in the terminal compartment.
The cylinder catch for retrofitting in the snap lock protects against unauthorised access.
A rear suspension unit ensures a concealed fit on the wall.
PC UL 94 V0 material is suitable for outdoor use (f1 listing acc. to to UL 746C and corresponds to requirements set R 22 acc. to DIN EN 45545-2 of hazard level HL3.
CF: Front lid can also be used separately as an installation area. A continuous seal guarantees protection class IP 54 to the installation area.
IC 5000: IP 65, crystal-clear lid, hinge (hinge side freely selectable), snap lock. With a large number of horizontal and vertical plug-in slots.

Video

Categories: Display enclosures,  Wall enclosures,  Enclosures IP 54 / DIN EN 60529 and higher,  Enclosures up to IP 40 / DIN EN 60529,  Enclosures IP 65 / DIN EN 60529 and higher,  Control panel enclosures,  Plastic enclosures,  Empty enclosures,  Enclosures,  Control panel enclosures