• IP degree of protection: Maximum degree of protection acc. to IEC/EN 60529 which can be achieved with this product series. For some product series, for example, a seal may be required and is available as an accessory.
  • Variable in dimensions: The product series is manufactured using profile technology, so the dimensions are variable.
  • Locking: The enclosures in this series can be locked. For some product series, a lock (available as an accessory) is required.
  • Wall mounting: The enclosures in this product series can be mounted on a wall without the need for additional processing. Wall brackets (available as accessories) are required for some product series.
  • Hinged catch: The product series is fitted with an integrated hinge, so the lid is captive. For some product series, a hinge (available as an accessory) is required.

CombiCard 5000-7000

This modular enclosure system offers adaptability and protection class IP 66

CombiCard 5000-7000
  • 3 widths
  • The depth can be varied by combining the components
  • Easy mounting of the system components
  • Hinge and access position freely selectable in the whole system
  • Various fronts
  • Optional rear element with separate terminal compartment (also on both sides)
  • Definable access protection
  • Installation of 19" components possible
  • Comprehensive range of accessories

Enclosure concept

Highlights

CombiCard is a modular system which allows the assembly of individual enclosure configurations.
All front, basic and rear elements can be combined in one basic size. The combination of “front with rear lid” can be created even without a basic element.
The integrated hinged quick-release catches allow easy fitting and left-hand or right-hand opening between each system component.
19“ subracks according to DIN EN 60297-3-101 can be fitted in suitable enclosure configurations.
With a suitable enclosure size, the base elements with air vents can be positioned according to the convection requirements.
Fitting of the enclosure does not require tools. Dismantling is possible with a slotted-head screwdriver.
Each hinged catch can be protected against unauthorised access by lock bolts or a lead seal. The fronts can be closed by means of a cylinder catch.
Circuit boards are fixed either by screw bosses in the rear lid or in guide grooves in the basic element.
Wall mounting is easy with the use of optional wall brackets.
The handle – available as an accessory – can be used to tip up the enclosure.

Characteristics

Colour

Lateral trims, front and base elements light grey, similar to RAL 7035; front lid FD…G, crystal-clear, rear elements agate grey, similar to RAL 7038; special colours on request.

Protection Class

IP 66/DIN EN 60529; with air vents IP 30/DIN EN 60529

Enclosure Material

ABS; PC (only FD…G), seal made of CR; for details see Technical Information

Application examples


Downloads

Categories: Plastic enclosures,  Wall-mounted enclosures,  Enclosures up to IP40,  Enclosures up to IP54,  Enclosures from IP54,  Control panel mounting enclosure,  Control panel mounting enclosures,  Empty enclosures,  Controller enclosures
BOPLA Digital – now interactive!