Cable glands / General Accessories | Top hat rail adapter
Universal DIN rail holder TSH 35, polyamide
Model | Order no. | Colour |
TSH 35 | 22035000 | Black, similar to RAL 9005 |
This DIN rail holder consists of a base and a bolt. The bolt can be snapped into the base in different positions. This makes it ideal for use with enclosure heights between 70 mm and 160 mm. It is fitted approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected from the rail by means of a screwdriver in the normal way. For assembly, insert the screws (enclosed) from the inside of the enclosure. This guarantees full insulation protection. On small enclosures, the part of the bolt which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders.
1 DIN rail holder, screws for enclosure mounting
Universal DIN rail holder TSH 35-2, polyamide
Model | Order no. | Colour |
TSH 35-2 | 20035000 | Black, similar to RAL 9005 |
You can use this universal DIN rail holder to clip or unclip enclosures with an extremely wide range of dimensions onto or from the DIN rail. This DIN rail holder can be screwed universally to every enclosure. It is necessary to process the enclosure.
2 DIN rail holders, 4 screws for enclosure mounting
Metal top hat rail adapter for DIN rail DIN EN 60715 TH 35
Model | Order no. | A | B | Note |
TSH 35 AL - 50 | 34035050 | 52 | 50 | Width 50 mm, natural colour anodised |
TSH 35 AL - 100 | 34035100 | 52 | 100 | Width 100 mm, natural colour anodised |
Use for DIN rail acc. to DIN EN 60715 TH35.
1 adapter