Cable glands / General Accessories | Screws
Screws (SHR) and distance bolts (DIBLZ) for mounting bosses in plastic enclosures
Model | Order no. | Note |
SHR Z KA22x6 | 59006195 | SD = 2.2 / ND = 1.7-1.8 / KD = 3.9 |
SHR Z KA25x6 | 59006190 | SD = 2.5 / ND = 2.0 / KD = 4.4 |
SHR Z KA30x6 | 59006219 | SD = 3.0 / ND = 2.4-2.6 / KD = 5.3 |
SHR Z KA30x8 | 59006217 | SD = 3,0 / ND = 2,4-2,6 / KD = 6,0 |
SHR Z KA35x6 | 59006209 | SD = 3.5 / ND = 2.8 / KD = 7.0 |
SHR Z KA35x8 | 59006210 | SD = 3.5 / ND = 2.8 / KD = 6.1 |
SHR Z KA35x10 | 59006220 | SD = 3.5 / ND = 2.8 / KD = 6.1 |
SHR Z KA40x6 | 59005271 | SD = 4,0 / ND = 3,2 / KD = 7,0 |
SHR Z B4,5x7,8 | 59006101 | SD = 4.5 / ND = 4.0 / KD = 7.5 |
SHR Z KA50x10 | 59006240 | SD = 5.0 / ND = 4.3 / KD = 8.2 |
SHR Z B6,3x9,5 | 59006110 | SD = 7.0 / ND = 5.5 / KD = 12.5 |
SHR Z M4x8 | 59005049 | KD = 8 |
DIBLZ AK 30x5/IM3/8 | 59006985 | ND = 2,4-2,6, length 8mm, SW 5,5 |
DIBLZ AK 30x7/IM3/8 | 59006987 | ND = 2,4-2,6, length 8mm, SW 5,5 |
DIBLZ AK 30x5/IM3/10 | 59006986 | ND = 2,4-2,6, length 10mm, SW 5,5 |
DIBLZ AK 30x7/IM3/10 | 59006988 | ND = 2,4-2,6, length 10mm, SW 5,5 |
DIBLZ AK30x7/IM3/26 | 59006922 | ND = 2,4-2,6, length 26mm, SW 5,5 |
DIBLZ AK30x5/IM3/28 | 59006921 | ND = 2,4-2,6, length 28mm, SW 5,5 |
DIBLZ AK30x7/IM3/36 | 59006998 | ND = 2,4-2,6, length 36mm, SW 6 |
DIBLZ AK30x7/IM3/56 | 59006924 | ND = 2,4-2,6, length 56mm, SW 5,5 |
Model | Order no. | Note |
DIBLZ AK30x5/IM3/58 | 59006923 | ND = 2,4-2,6, length 58mm, SW 5,5 |
DIBLZ AK30x7/IM3/74 | 59006926 | ND = 2,4-2,6, length 74mm, SW 5,5 |
DIBLZ AK30x5/IM3/76 | 59006925 | ND = 2,4-2,6, length 76mm, SW 5,5 |
DIBLZ AK30x7/IM3/86 | 59006927 | ND = 2,4-2,6, length 86mm, SW 5,5 |
DIBLZ AK30x5/IM3/88 | 59006928 | ND = 2,4-2,6, length 88mm, SW 5,5 |
DIBLZ AK30x7/IM3/114 | 59007129 | ND = 2,4-2,6, length 114mm, SW 5,5 |
DIBLZ AK30x5/IM3/116 | 59007130 | ND = 2,4-2,6, length 116mm, SW 5,5 |
Explanation of the table: SD = screw diameter; ND = boss internal diameter; KD = screw head diameter. All dimensions in mm.
In most BOPLA plastic enclosures, mounting bosses without threaded bushings are provided as mounting points. Screws with a self-tapping thread must be selected accordingly. When selecting screws, note the details of the boss internal diameters (see drawings on internet) and the drilling depth. The tightening torques for plastic depend on screw-in depth, screw-in speed, accuracy of torque switch-off of the power screwdriver, etc., so it is not possible to provide general data about the tightening torques.
1 piece
Threaded inserts, brass, for mounting bosses in plastic enclosures
Model | Order no. | Note |
DODGE M3x6,5 | 59002810 | ND = 4.0 x 6.5 |
DODGE M4x9,5 | 59002820 | ND = 5.4 x 9.5 |
Explanation of the table: ND = boss internal diameter
Mounting instructions: Insert the connector into the boss until it reaches the bottom. Then flatten the plate using a pin.
It is very difficult to remove fitted threaded connectors. With reference to the directive relating to electronic scrap, recycling of the enclosure is very expensive. For this reason, it is not possible for us to take back enclosures which have subsequently been processed in this way.
1 threaded insert