• IP degree of protection: Maximum degree of protection acc. to IEC/EN 60529 which can be achieved with this product series. For some product series, for example, a seal may be required and is available as an accessory.
  • IK degree of protection: Maximum impact protection acc. to IEC/EN 62262 which can be achieved with the product series.
  • Flammability rating UL94 V-0: The product series, or some variants, are manufactured of a flame-retardant plastic with a flammability rating of UL 94 V-0.
  • Railway standard DIN EN 45545: The material in the product series complies with the requirements of railway standard DIN EN 45545 for use with maximum hazard level HL3.
  • UV protection: The product series or some variants are manufactured from plastics whose certification acc. to UL 746 C means that they are suitable for outdoor use.
  • Locking: The enclosures in this series can be locked. For some product series, a lock (available as an accessory) is required.
  • Wall mounting: The enclosures in this product series can be mounted on a wall without the need for additional processing. Wall brackets (available as accessories) are required for some product series.
  • Mast mounting: The enclosures in this product series can be attached to a mast by means of a mounting (available as an accessory).
  • Hinged catch: The product series is fitted with an integrated hinge, so the lid is captive. For some product series, a hinge (available as an accessory) is required.

Euromas ABS / PC / F05

Classic enclosure made of polycarbonate or lower-cost ABS

Euromas ABS / PC / F05
  • 36 sizes
  • 19 different M...V0 versions corresponding to UL 94 V0
  • The PC enclosures (also available in UL 94 V0) are suitable for outdoor use (f1 listing acc. to UL 746C)
  • The PC UL 94 V0 material corresponds to requirement set R22 acc. to DIN EN 45545-2 of hazard level HL3 (railway standard)
  • Terminals and mounting on request
  • Fixing screws for DIN rails or mounting panels included in scope of delivery
  • Types made of anti-static Vestamid with F05 insertion opening

Application examples

Highlights

Large processing areas and versatile mounting options for connectors, switches and keys.
Two different lids (grey or crystal-clear) allow use as displays or operating enclosures.
Circuit boards can be securely fixed in the base by means of screw domes.
The enclosure can be fitted to the wall by means of the screw channels in the base or wall brackets.
The enclosure can also be supplied on request with quick-release fastener screws.
Optional hinges allow easy opening/closing of the lid.
The factory-fitted seal can be replaced with a silicone seal – this optimises the operating temperature and the chemical resistance. Factory-fitting on request.
PC UL 94 V0 material is suitable for outdoor use (f1 listing acc. to to UL 746C and corresponds to requirements set R 22 acc. to DIN EN 45545-2 of hazard level HL3.
Special versions with an F05 mounting flange in Vestamid antistatic plastic for applications with actuators and valves.

Characteristics

Colour

Light grey, similar to RAL 7035; special colours on request
V 215: black, similar to RAL 9005

Protection Class

Depending on the model: IP 65 or IP 66/DIN EN 60529; IP 67 available on request for some sizes
Impact protection IK 07 acc. to IEC 62262 for versions made of PC

Enclosure Material

ABS, PC (UV stabilised) and selected sizes in PC UL 94 V0 (additional UL 94 V0 versions on request), seal made of CR;
V215: Vestamid, CR seal; for details see Technical Information

Downloads

Product Brochures

Works Test Certificates

Technical Information

Categories: Display enclosures,  Enclosures IP 54 / DIN EN 60529 and higher,  Enclosures up to IP 40 / DIN EN 60529,  Control panel enclosures,  Plastic enclosures,  Empty enclosures,  Enclosures,  Standard enclosures,  Terminal enclosures
360° virtual interactive tour of BOPLA!