Cable glands / General Accessories
|UC1 - 7024||34197024||Graphite grey, similar to RAL 7024|
|UC1 - 7035||34197035||Light grey|
|UC1 - 7038||34197038||Agate grey, similar to RAL 7038|
|UC1 - 9005||34199005||Black, similar to RAL 9005|
Mechanical processing and mounting on request.
The fitting of the clip does not affect the protection class of the enclosure (IP 65).
1 clip incl. fixing material
Universal clip and tip-up clip
|ASC 1||34090010||Agate grey, similar to RAL 7038|
|ASC 1||34090000||Black, similar to RAL 9005|
Can be fitted subsequently to all enclosure. Processing of the enclosure on request.
For use as a wall hanging unit when in closed position. Unlock the tip-up bow to swivel it by 90°.
1 clip (polyamide), incl. screws
Wall fitting for ASC 1, ABS
|WH-ASC 1-7038||34090011||Agate grey, similar to RAL 7038|
|WH-ASC 1-9005||34090001||Black, similar to RAL 9005|
1 wall fitting
Universal screw-on lanyard loop, plastic
|OE-7024||59907024||Graphite grey, similar to RAL 7024|
|OE-7038||59907038||Agate grey, similar to RAL 7038|
|OE-9005||59909005||Black, similar to RAL 9005|
Mechanical processing of the enclosure is required. Load capacity: Max. 15 kg (150 N). Up to IP 65/DIN EN 60529 possible.
5 loops including screws
Handle HS 1; side parts: black plastic; handle profile: natural-coloured anodised aluminium
|HS 1-9005||20008073||Black, similar to RAL 9005||Side parts|
|HSP 1-1000||20008075||Natural-coloured anodised||Handle profile, length: 1000 mm|
Because it swivels (fixed latching position every 30°), the handle can be used both for carrying purposes or as a set-up bow for desktop use.
Handles HS1 and HS2 consist of 2 side parts and 1 profile. In order to guarantee customer-specific usage, side parts and profile are ordered separately. In this way, the handle lengths can be adjusted to fit any enclosure. On request we can supply the required profile length and carry out the necessary processing on the enclosure. The maximum load is 300 N; ingress protection max. IP 65 / DIN EN 60529, depending on installation arrangement.
Handle side parts (PA6), seals, screws
Scope of delivery HSP: profile (aluminium)
Handle HS 2; side parts: black plastic; handle profiles: natural-coloured anodised aluminium (AE) / black anodised (SE)
|HS 2-9005||20008074||Black, similar to RAL 9005||Side parts|
|HSP 2-1000-AE||20008076||Natural-coloured anodised||Handle profile, length: 1000 mm|
|HSP 2-1000-SE||20008077||Black anodised||Handle profile, length: 1000 mm|
Because the handle swivels (fixed detent position every 15°), it can be used as a carrying handle and also as a tip-up bow for console use.
Handles HS1 and HS2 consist of two side parts and a profile. In order to guarantee customer-specific application, the side parts and profile can be ordered separately. This makes it possible to adapt the length of the handles to any enclosure. On request we can supply the required profile length and carry out the necessary processing on the enclosure. The maximum load is 150 N; protection class IP 40 / DIN EN 60529 - depending on installation situation, higher protection class is available on request.
2 side parts, screws
Scope of delivery HSP: 1m profile
Universal DIN rail holder TSH 35, polyamide
|TSH 35||22035000||Black, similar to RAL 9005|
This DIN rail holder consists of a base and a bolt. The bolt can be snapped into the base in different positions. This makes it ideal for use with enclosure heights between 70 mm and 160 mm. It is fitted approximately in the middle of the enclosure, and the bolt projecting from the enclosure base can be disconnected from the rail by means of a screwdriver in the normal way. For assembly, insert the screws (enclosed) from the inside of the enclosure. This guarantees full insulation protection. On small enclosures, the part of the bolt which projects upwards can be pinched off. In the case of very wide enclosures, it may be necessary to fit two DIN rail holders.
1 DIN rail holder, screws for enclosure mounting
Universal DIN rail holder TSH 35-2, polyamide
|TSH 35-2||20035000||Black, similar to RAL 9005|
You can use this universal DIN rail holder to clip or unclip enclosures with an extremely wide range of dimensions onto or from the DIN rail. This DIN rail holder can be screwed universally to every enclosure. It is necessary to process the enclosure.
2 DIN rail holders, 4 screws for enclosure mounting
Metal top hat rail adapter for DIN rail DIN EN 60715 TH 35
|TSH 35 AL - 50||34035050||52||50||Width 50 mm, natural colour anodised|
|TSH 35 AL - 100||34035100||52||100||Width 100 mm, natural colour anodised|
Use for DIN rail acc. to DIN EN 60715 TH35.
Universal VESA standard (75x75) wall fitting, polyamide glass fibre reinforced
Enclosure adapter for direct mounting on the BOP 7.0 / BOP 10.1 by means of processing, also for screwing onto the BOP 900. The wall panel is suitable for wall mounting, cavity wall box mounting and VESA mounting.
The wall fitting can be used for every enclosure with a fixing area greater than/equal to 115x90 mm.
Enclosure adapter, wall panel, 4 fastening screws, 1 fixing screw
Mast mounting, stainless steel V2A, uncoated
|BFS MH 1||96500001**||Fixing kit|
|BFS MH 2||96500002**||Fixing kit|
|BFS MH 3||96500003**||Fixing kit|
Please order the assembly kit and mast clamp as per the table.
**= Available as of July 2021
MH: 1 set (2 pieces)
BFS: 20 pieces
Universal wall fitting UWB
|UWB 7024||94800024||Graphite grey, similar to RAL 7024|
|UWB 7035||94800035||Light grey|
|UWB 7038||94800038||Agate grey, similar to RAL 7038|
|UWB 9005||94800005||Black, similar to RAL 9005|
Because of the various settings (fixed detent position every 10°), can be used as a wall fitting and also as a foot. Side elements and profiles can be ordered separately to ensure a customer-specific application. This allows the length of the profiles to be adapted to every enclosure. On request we can supply the required profile length and carry out the necessary processing of the enclosure.
Protection class up to IP 65 / DIN EN 60529
2 side parts, mounting material; scope of delivery for UWB profile: 1 m profile
Universal holder, can be turned and inclined, with screw fitting, black
Screwless fitting possible by means of rear adhesive layer. Can be turned by 360°. Matches universal adapter UGA-1/4.
1 holder including screws
Universal holder with self-adhesive foil, black
|UH-4||22014830||With self-adhesive foil|
Matches universal adapter UGA-1/4.
Universal adapter with self-adhesive foil, black
|UGA-1||22014710||With self-adhesive foil|
Matches universal holder UH-2 up to -4.
Tip-up feet, polyamide
|AB 1230||39603000||Including 4 sheet metal screws|
|AB 1230-M4||64116000||With 4 metric screws and nuts|
With its front collapsible feet, the universal set-up foot set AB 1230 enables you to stand the enclosure either parallel or at an angle (easier access to the operating front).
Set-up foot set (2 fixed and 2 hinged feet), fixing material
Universal rubber feet for stability of the enclosures on all surfaces
|BOP-GF||35800300||Transparent||Polyurethane, 65-75 Shore|
|AB - GF||84006700||Black||Polyurethane, 65-75 Shore|
|GF||22009000||Black||Polyurethane, 65-75 Shore|
|E-F||25002200||White||Rubber, 67 Shore, for E 440-E 470, for E 434 S|
|BA||35002410*||Black||Polyurethane, 65-75 Shore|
4 rubber feet
Battery compartments, plastic, IP 65 / DIN EN 60529
|BE-3MN-IP-7024||58317024||Graphite grey||For 3 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-3MN-IP-7035||58317035||Light grey||For 3 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-3MN-IP-7038||58317038||Agate grey||For 3 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-3MN-IP-9005||58319005||Black||For 3 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-4MN-IP-7024||58417024||Graphite grey||For 4 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-4MN-IP-7035||58417035||Light grey||For 4 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-4MN-IP-7038||58417038||Agate grey||For 4 mignon batteries (LR6, R06, AM3, E 91, AA)|
|BE-4MN-IP-9005||58419005||Black||For 4 mignon batteries (LR6, R06, AM3, E 91, AA)|
Processing of the enclosure and mounting of the battery compartment on request. Use the adhesive film (included in scope of delivery) to seal the battery compartment IP-tight.
1 battery compartment including battery contacts
Battery compartments, black plastic, IP 40 / DIN EN 60529
|BE 30||46300000||For one 9V block battery (6LR61, 6AM6,522) or 2 mignon batteries (LR6, R06, AM3, E91, AA)|
|BE 60||46600000||For two 9V block batteries (6LR61, 6AM6,522) or 4 mignon batteries (LR6, R06, AM3, E91, AA)|
Processing of the enclosure and mounting of the battery compartment on request. The battery compartment is snapped into the cut-out provided by means of moulded-on snap-on devices.
1 battery compartment including 4 (BE 30) or 8 (BE 60) battery contacts
Battery compartment for 9V block battery, black plastic
Processing of the enclosure and mounting of the battery compartment on request. Battery clip BH 9V-Clip 34165578 as accessory.
1 battery compartment including tension frame
|BH 2MC||34165572||For 2 micro batteries (LR03, R03, AM4, E92, AAA), connection with soldering tags|
|BH 4MC||34165573||For 4 micro batteries (LR03, R03, AM4, E92, AAA), connection with soldering tags|
|BH 2MN||34165574||For 2 mignon batteries (LR6, R06, AM3, E91, AA), connection clip included in scope of delivery|
|BH 3MN||34165575||For 3 x mignon (LR6, R06, AM3, E91, AA), connection clip included in scope of delivery|
|BH 4MN||34165579||For 4 mignon batteries (LR6, R06, AM3, E91, AA), connection clip included in scope of delivery|
|BH 4MN-BL||34165576||For 4 mignon batteries (LR6, R06, AM3, E91, AA), connection clip included in scope of delivery|
|BH 6MN-BL||34165577||For 6 mignon batteries (LR6, R06, AM3, E91, AA), connection clip included in scope of delivery|
|BH 9V-CLIP||34165578||Clip for 9 V block (6LR61, 6AM6, 522), Connection with soldering tags|
5 battery holders or 5 clips
Screws (SHR) and distance bolts (DIBLZ) for mounting bosses in plastic enclosures
|SHR Z KA22x6||59006195||SD = 2.2 / ND = 1.7-1.8 / KD = 3.9|
|SHR Z KA25x6||59006190||SD = 2.5 / ND = 2.0 / KD = 4.4|
|SHR Z KA30x6||59006219||SD = 3.0 / ND = 2.4-2.6 / KD = 5.3|
|SHR Z KA30x8||59006217||SD = 3,0 / ND = 2,4-2,6 / KD = 6,0|
|SHR Z KA35x6||59006209||SD = 3.5 / ND = 2.8 / KD = 7.0|
|SHR Z KA35x8||59006210||SD = 3.5 / ND = 2.8 / KD = 6.1|
|SHR Z KA35x10||59006220||SD = 3.5 / ND = 2.8 / KD = 6.1|
|SHR Z B4,5x7,8||59006101||SD = 4.5 / ND = 4.0 / KD = 7.5|
|SHR Z KA50x10||59006240||SD = 5.0 / ND = 4.3 / KD = 8.2|
|SHR Z B6,3x9,5||59006110||SD = 7.0 / ND = 5.5 / KD = 12.5|
|SHR Z M4x8||59005049||KD = 8|
|DIBLZ AK 30x5/IM3/8||59006985||ND = 2,4-2,6, length 8mm, SW 5,5|
|DIBLZ AK 30x7/IM3/8||59006987||ND = 2,4-2,6, length 8mm, SW 5,5|
|DIBLZ AK 30x5/IM3/10||59006986||ND = 2,4-2,6, length 10mm, SW 5,5|
|DIBLZ AK 30x7/IM3/10||59006988||ND = 2,4-2,6, length 10mm, SW 5,5|
|DIBLZ AK30x7/IM3/26||59006922||ND = 2,4-2,6, length 26mm, SW 5,5|
|DIBLZ AK30x5/IM3/28||59006921||ND = 2,4-2,6, length 28mm, SW 5,5|
|DIBLZ AK30x7/IM3/36||59006998||ND = 2,4-2,6, length 36mm, SW 6|
|DIBLZ AK30x7/IM3/56||59006924||ND = 2,4-2,6, length 56mm, SW 5,5|
|DIBLZ AK30x5/IM3/58||59006923||ND = 2,4-2,6, length 58mm, SW 5,5|
|DIBLZ AK30x7/IM3/74||59006926||ND = 2,4-2,6, length 74mm, SW 5,5|
|DIBLZ AK30x5/IM3/76||59006925||ND = 2,4-2,6, length 76mm, SW 5,5|
|DIBLZ AK30x7/IM3/86||59006927||ND = 2,4-2,6, length 86mm, SW 5,5|
|DIBLZ AK30x5/IM3/88||59006928||ND = 2,4-2,6, length 88mm, SW 5,5|
Explanation of the table: SD = screw diameter; ND = boss internal diameter; KD = screw head diameter. All dimensions in mm.
In most BOPLA plastic enclosures, mounting bosses without threaded bushings are provided as mounting points. Screws with a self-tapping thread must be selected accordingly. When selecting screws, note the details of the boss internal diameters (see drawings on internet) and the drilling depth. The tightening torques for plastic depend on screw-in depth, screw-in speed, accuracy of torque switch-off of the power screwdriver, etc., so it is not possible to provide general data about the tightening torques.
Threaded inserts, brass, for mounting bosses in plastic enclosures
Explanation of the table: ND = boss internal diameter
Mounting instructions: Insert the connector into the boss until it reaches the bottom. Then flatten the plate using a pin.
It is very difficult to remove fitted threaded connectors. With reference to the directive relating to electronic scrap, recycling of the enclosure is very expensive. For this reason, it is not possible for us to take back enclosures which have subsequently been processed in this way.
1 threaded insert